HD-02

• Hammer drive fastening tool.

• No power load required.  Use a 1 to 1.5 kg hammer with a few strikes to set the pins. (This is not a powder actuated tool)

• Easy fastening into mortar, masonry, and concrete without drilling.

• The best alternative for environments sensitive to noise pollution

• Hammer drive setting tool

• Length: 15.3cm

• Weight: 225g

• Pin length: 1/2" - 3"

• Pin type:  1/4" head pins with 3/8" steel washer up to 3" long or .300 head pins up to 3" long, or M4 8-32  threaded studs.